JVC Projector Driver

Sorry I'm not much help but I just checked my theatre and my app still works fine with my older JVC projector. I updated Myserver yesterday. (I typically update drivers immediatelly whenever there is a new driver.)

Tried restarting the projector, tried restarting myServer, tried rebooting the myServer host, tried rebooting the router, tried reinstalling the JVC driver and/or reading the projector. 

I cannot think of anything that changes periodically on my network to cause the random issues I'm experiencing. 
My router is set to reboot Saturdays at 4am, my NAS server reboots on Tuesdays at 1am. I install updates into myServer and host every two days at the most and usually will reboot the host at least once a week. 

​​​​​​
​​​​​

Post what's in the event log when you try to interact with the projector and nothing is happening when you do. Are there any other errors in the log? Post them too.
Note you can click the new "paperclip" in Dashboard and add a space in the log to make it easier to locate the commands you then process.

David Li wrote:

Post what's in the event log when you try to interact with the projector and nothing is happening when you do. Are there any other errors in the log? Post them too.
Note you can click the new "paperclip" in Dashboard and add a space in the log to make it easier to locate the commands you then process.

log below
 17/10/2024 17:55:24.55 · DEBUG · JVCProjector.Poll JvcProjector - ...17/10/2024 17:55:24.55 · ERROR · JVCProjector.ConnectAndSend - Error in ConnectAndSend - Connection refused17/10/2024 17:55:38.55 · DEBUG · Server.doCommand - If|isEQ##drivers##scheduler##LoadProject|drivers##LoadScene|drivers from dashboard-fx-fej417/10/2024 17:55:38.55 · DEBUG · Server.Conditional - IsEqual? [DRIVERS]=[SCHEDULER]17/10/2024 17:55:38.55 · DEBUG · Server.doCommand - LoadScene|drivers from dashboard-fx-fej417/10/2024 17:55:38.55 · DEBUG · Server.WebCmd - Loadscene|drivers17/10/2024 17:55:40.55 · DEBUG · Server.doCommand - Loadscene|jvcprojector from dashboard-fx-fej417/10/2024 17:55:40.55 · DEBUG · Server.WebCmd - Loadscene|jvcprojector17/10/2024 17:55:54.55 · DEBUG · JVCProjector.Poll JvcProjector - ...17/10/2024 17:55:54.55 · ERROR · JVCProjector.ConnectAndSend - Error in ConnectAndSend - Connection refused17/10/2024 17:55:55.55 · DEBUG · Server.doCommand - AV|109~SelectDevice from dashboard-fx-fej417/10/2024 17:55:55.55 · INFO · JVCProjector.doCommand - Cmd=[109~SelectDevice] Client=[dashboard-fx-fej4]17/10/2024 17:56:24.56 · DEBUG · JVCProjector.Poll JvcProjector - ...17/10/2024 17:56:24.56 · ERROR · JVCProjector.ConnectAndSend - Error in ConnectAndSend - Connection refused17/10/2024 17:56:25.56 · DEBUG · Server.doCommand - AV|{{av_{{active_projector_{{clientname}}}}_name}}~Power~On from dashboard-fx-fej417/10/2024 17:56:25.56 · DEBUG · Server.doCommand - AV|JvcProjector~Power~On17/10/2024 17:56:25.56 · INFO · JVCProjector.doCommand - Cmd=[JvcProjector~Power~On] Client=[dashboard-fx-fej4]17/10/2024 17:56:49.56 · DEBUG · Server.doCommand - AV|{{av_{{active_projector_{{clientname}}}}_name}}~Source~HDMI1 from dashboard-fx-fej417/10/2024 17:56:49.56 · DEBUG · Server.doCommand - AV|JvcProjector~Source~HDMI117/10/2024 17:56:49.56 · INFO · JVCProjector.doCommand - Cmd=[JvcProjector~Source~HDMI1] Client=[dashboard-fx-fej4]17/10/2024 17:56:54.56 · DEBUG · JVCProjector.Poll JvcProjector - ...17/10/2024 17:56:54.56 · ERROR · JVCProjector.ConnectAndSend - Error in ConnectAndSend - Connection refused17/10/2024 17:57:03.57 · DEBUG · Server.doCommand - AV|{{av_{{active_projector_{{clientname}}}}_name}}~Power~On from dashboard-fx-fej417/10/2024 17:57:03.57 · DEBUG · Server.doCommand - AV|JvcProjector~Power~On17/10/2024 17:57:03.57 · INFO · JVCProjector.doCommand - Cmd=[JvcProjector~Power~On] Client=[dashboard-fx-fej4]17/10/2024 17:57:24.57 · DEBUG · JVCProjector.Poll JvcProjector - ...17/10/2024 17:57:24.57 · ERROR · JVCProjector.ConnectAndSend - Error in ConnectAndSend - Connection refused

@davep
@David Li

Any thoughts? 
This is the last undesirable quirk I'm experiencing with the SmartRemote and myServer. 

we are going to have to teamviewer in to see what it's doing. It is highly likely just a timing issue in the driver because JVC chose to implement a very Kludgy authentication method that is timing centric. Worse, they change it with each model. I just don't understand why these folks can't agree on a single way to turn on / off stuff....make it so difficult.