Welcome to the Allonis forum! Tell us and our members who you are, what you like and why you became a member of this site. We welcome all new members and hope to see you around a lot!
You don't need to do that...you can use myDesigner and put a label object ontop of your graphic.
You can change the Z order in myDesigner too.
Or put the volume in an Overlay and put that ontop of the base layer. There are examples of this in the YouTube myDesigner videos.
Setting Up Remote ran into first brick wall
I have MyServer6 up and running on Pi4 and added users and rooms and a few devices
installed MyDesigner6 but it will not find any project templates
Settings:
file share: "\\MYSERVER-IP\myServer"
web server URL: "http://MYSERVER-IP/"
I'm also tried running MyDesigner as admin
and also disabling firewall "eset"
Setting Up Remote ran into first brick wall
I have MyServer6 up and running on Pi4 and added users and rooms and a few devices
installed MyDesigner6 but it will not find any project templates
Settings:
file share: "\\MYSERVER-IP\myServer"
web server URL: "http://MYSERVER-IP/"
I'm also tried running MyDesigner as admin
and also disabling firewall "eset"
Thanks
Can we TeamViewer into the system to see how things are setup?
