Problem with Tivo Driver

Has anyone had any luck with the Tivo driver?  I added two of my Tivo DVRs.  When I try a command, nothing happens on my Tivo.  The verbose log looks like it's sending the correct command, but looking at wireshark, it doesn't look like anything is being sent from MyServer to either Tivo.


Am I missing something?

Kyle

I also had problems using the TiVo driver.  I didn't dig into it at all since I rarely use the TiVo anymore.

Try the version of the driver I just released. I added some more messages to see what it is doing. Turn on verbose logging and restart myServer so we can see the full cycle of it connecting to the Tivo and trying to send a command.

Dave,

That was fast!  Here is a log from the new driver:

20/02/2024 21:54:35.54 · DEBUG · Server.doCommand - AV|11~Guide from dashboard-fx-dnny 
20/02/2024 21:54:35.54 · DEBUG · Tivo.doCommand - Cmd=[11~Guide] Client=[dashboard-fx-dnny] 
20/02/2024 21:54:35.54 · DEBUG · Tivo.TX: (TivoTheater) - Not sent client not connected 

I used Telnet to log into my Tivo on port 31339 and it connected.  I tried out a few commands (TELEPORT GUIDE, etc.) and they all worked.

Kyle

Just wanted to report that I got the same error messages.

To add to my earlier post, contrary to the MyServer log, the Tivo device is available and accepting commands.  Here is a snippet of sending some commands to the Tivo via Telnet:
Hope this helps.

Kyle