Weird Issue

This one is a bit weird.  Last night the USB port powering one of my Global Cache units (IP2IR) was turned off so the unit went dark.  It only controls a couple of things not in use at the time so I didn't notice it.  The odd behavior was that I lost control to my ATV (not controlled by IR).  I could still control other devices but the ATV stopped responding.  

My log was being flooded with the Device not Connected errors.  As you can see below the Anthem command was processed.  The ATV commands were being processed (sent), but nothing was happening on the ATV.  When I restored the power, all was well..

18/01/2025 20:44:05.44 · ERROR · GenericIR.SendCommand - Cannot send command to device iTachIP2IR - Device not connected 
18/01/2025 20:44:06.44 · DEBUG · GenericIR.NetDisconnect - Device (28) has disconnected. 
18/01/2025 20:44:20.44 · DEBUG · GenericIR.TX >>> - iTachIP2IR:getdevices 
18/01/2025 20:44:20.44 · ERROR · GenericIR.SendCommand - Cannot send command to device iTachIP2IR - Device not connected 
18/01/2025 20:44:27.44 · DEBUG · Server.doCommand - AV|7~Volume~65 from remote2 
18/01/2025 20:44:27.44 · DEBUG · Anthem.doCommand - Cmd=[7~Volume~65] Client=[remote2] 
18/01/2025 20:44:35.44 · DEBUG · GenericIR.TX >>> - iTachIP2IR:getdevices 

This isn't anything critical, it was more of a weird observation...

Is it possible your ATV rebooted. There's still an issue with the AppleTV driver where if the ATV reboots then MyServer loses connection with it and won't re-establish a connection without restarting MyServer. I opened an issue about it a long time ago but it still hasn't been addressed.

allonis.com/forum/apple-tv-driver/354-re...r-to-lose-connection

No, it didn't reboot, we were in the middle of watching a movie. I had to grab the ATV remote to get it to pause.