I think I got the new Anthem driver setup, and it mostly works with my MRX1120. I did run into a couple snags:
Unfortunately for me Discover didn't work, but I was able to add it manually.
While adding my Anthem, it didn't entirely work. I ran the following command: Anthem|AddAmp~MRX1120~192.168.0.98~Home Theater, however it added the IP address as the Model, and the IP address was blank. I filled out the IP address correctly and myServer was able to connect and control it.
Mute, source selections, power off, and power on work, but volume up/down and power toggle (don't care about the last one personally).
I was seeing the following errors in the log, but they seem to have cleared up after turning the Anthem off and on.
Code:
13/02/2024 21:19:39.19 · DEBUG · Server.doCommand - AV|{{active_anthem_{{clientname}}}}~Source~2 from dashboard-fx-posm
13/02/2024 21:19:39.19 · DEBUG · Server.doCommand - AV|10~Source~2
13/02/2024 21:19:39.19 · ERROR · Anthem.ProcessResponse - Error in ProcessResponse - Index and length must refer to a location within the string. (Parameter 'length')
Great work so far!
