Introducing Allonis's myAtom solution.
Originally developed for adding IP (and IR) support of the EverPass / Brightsign media player.
The myAtom hardware connects to myServer via Wifi.
Installation:
Plug the Atom processor into the USB-C to USB-A adapter. Plug the USB-A into the EverPass receiver's USB slot (remove the Flirc Infrared hardware first).
The EverPass USB should power up the Atom. Simply press and hold the Atom's top mounted button. This puts the Atom into Wifi Access Point mode. Then, using a Wifi equipped laptop computer, connect to the Atom access point in your Scanned Wifi devices. A webpage will open to configure the Atom to your Wifi network. Scan for the Wifi network, select it. Type the security credentials for that Wifi network. You can also type a static IP address or keep it DHCP. If DHCP is used, ensure you reserve that IP on your Router so it never changes.
Download and install the myServer Atom driver in myServer's Software Updater. Once installed, click on Configure. Click the Discover button. In a few minutes, all Atom devices should be added to the list of discovered devices. Edit each device for the role (Ip2Keyboard vs. Ip2IR) and name it.