• Try Us Out - See our Demo Tabs Above

    Sports Bars

    Experience our Sports Bar TV, Audio and Lighting Control System with our awesome demo! We provide multiple TV control systems that will easily integrate your Audio/Video and environmental components into one easy to use package. Let multiple hand-held remotes be a thing of the past and experience hassle free one-touch control. With the versatility of myServer 6, you may be able to retrofit existing equipment into the control system which makes it economical to get the most value out of your technology investment.

    Residential

    With a whole new exciting look and feel our transparent "Moonlight" user interface allows clarity and ease in maneuvering your lighting floor plan, climate control, security cameras, and security keypad as well as entertainment options. Control all aspects of your home with simplicity and confidence.

    Digital Signage

    Allonis makes it easy to control and launch your media content. We have created software that ties in seamlessly to your bar or restaurant control system. Upload new images and videos, discard old ones, decide what to play or post and where with just a few selections.

  • Sports Bar & Restaurant Demo

    Select a source on the left and then select the TVs you would like to change on the right.

    Along the bottom are options for a DirecTV remote, TV Guide, Audio, Favorites & AppleTV. In addition you can touch the video camera on the left hand source options to get a live preview of what's playing on that source. Be sure to click around and try everything.

    Read More

     

    Customer Listening Experience

    Pan from left to right and up and down to see all the TVs.

    Customers can select the TV closest to them to tune in to the audio.

    Read More

     

    No Floorplan Option.

    If you are not interested in a navigable floor plan we can provide a generic interface instead.

    The same features are supported.

    Read More
  • Residential Demo

    Below is our residential simulation.

    Be sure to click around and try everything. Read more about the UI below.

    Read More
  • Digital Signage

    In the large window select a player on the left. Then select an option layout on the right. Select available assets from the list provided. You can add a ticker of either a message or weather by checking the boxes. When you are finished making selections click “send to player”. Your choice will appear on the corresponding player above. To pause a video click the player once.

    Read More
  • SmartRemote Demo

    Below is our SmartRemote simulation.

    Be sure to click around and try everything. Read more about the UI below.

    Read More

Our Products

See the latest myServer 6 products, available for individual purchase or part of a custom Allonis system built especially for your project.
Software
Hardware
Sports Bars
Services

myServer 6 Pi4 Hardware installation

 

myServer 6 Pi is Allonis's pre-built automation controller developed for small to medium complexity systems.  It was designed primarily for Sports Bars and Restaurant systems for it's low cost, reliability and rack mount options.   It will run in a 30 day demo that supports up to 50 device licenses (some devices consume more than 1 device unit).

myServer 6 Pi is configured so that it can run "Headless".  No need for a monitor or keyboard / mouse to be connected.

1) Remove the automation controller from the packaging

2) Ensure the USB boot drive is plugged into the Pi4's Blue USB 3.0 port for high speed (USB is recommended for high performance and reliability and is the method used for all sports bar / restaurant commercial projects).  If using SDMicro, carefully insert that into the SDMicro port.  Note that if you have Both plugged in, the Pi4 will boot from the SDMicro by default.  If the USB doesn't boot, the firmware needs to be updated and configured for USB.

3) Plug in the USB-C 3Amp power supply cable into the end USB-C connector.  Do not use lower amperage power supply (like for a phone).

4) Optionally plug in a wireless USB keyboard / mouse receiver into an unused Pi4 USB connector.  Optionally plug in an HDMI Micro cable to the HDMI micro connector closest to the USB-C power connector.  Plug the other end of the HDMI cable into a powered up HDMI monitor.  Rack mount versions use a standard HDMI connector (not MicroHDMI).

5) Optionally connect the ethernet connector to an Internet accessible LAN port (recommended for reliability).  If no ethernet connection is available, WiFi will be used.

6) Plug in the power supply into a 110v wall outlet.  The Controller will then boot.  It is recommended that all of the sensitive electronics (including myServer 6 controller) is plugged into a UPS to ensure it is protected against brown outs or repetitive power down / power up cycles.

 

When the Controller boots the following happens:

If connected to the network via wired ethernet the Controller will boot in about 3 minutes, and connect to the network. The Controller will get it's IP address from the network's DHCP server.  Once on the network, use a network connected phone or laptop and within a browser, type http://<<ipaddress>>/<<YourBarnName>> in the browser URL window. 

 

On 64 bit Linux OS, the application installs to this directory:

/home/allonis/applications/myServer

Pi user = allonis and default password = allonis

 

ADVANCED

myServer 6 should always be on an IP address that never changes.

This can be done on the network's DHCP Server by reserving an IP address for the myServer 6 controller's MAC address.

Or, the myServer 6 Controller can be setup with a Static address.  Contact Allonis to assist with setting the address up remotely.  Note that it is very important that Allonis has the proper networking details to ensure that it can join that network and still maintain Internet connectivity so Allonis can remotely connect to it.  If this process fails, then the local user will have to contact Allonis for a difficult process to locally get the device back onto the network.