myServer 1U Build
Label Pi Gb on the ethernet port with Sharpie (ie: "4")
Put heat sinks on CPU, RAM, USB, ethernet (use black "low height" heat sinks)
Put HDMI extension on Pi4.
Put Pi on 1U. Careful putting ethernet NIC into front panel. Two screws to affix Pi, to mount, two more screws for HDMI extension to mount.
Put GPIO Waveshare heatsink on 40 pin GPIO pins. Be carefull all are lined up.
Put Allonis decal on front face.
Burn latest myServer image to 128gig USB 3.0 / 400mhz storage drive
Install USB drive to bottom blue 3.0 usb slot
Plug HDMI cable to monitor into top HDMI port.
Plug Internet connected ethernet cable to PI NIC
Plug wireless keyboard / mouse adapter to top USB 2.0 port
Plus USB-C wallwart and power on.
Wait for OS to boot second time.
Accept Teamviewer License
Open Teamviewer console from bottom right icon
Write down TV ID
Go to TV desktop on a second PC. Login to Allonis's TV account. Add new Remote Computer. Click + icon at top, then choose Add Remote Computer.
Type: TeamViewer ID, then Password: Allonis=1
Alias Name computer with "Project name - Integrator name"
Put into "Current Project" Teamviewer folder
Type Allonis=1 in description.
Enter in any other relevant information in description.
Save by clicking OK.
Open Teamviewer myServer instance from list (Current Project folder)
Accept: Unlock Profile and Relaunch if asked.
Open 127.0.0.1/dashboard in browser (click on browser icon on bottom left to launch browser)
Click Commands. Enter SetName|<<myServer project name (typically the name of the bar)>>
System will automatically rebooot. Upon reboot:
Update myServer and all project relevant drivers / apps from Software Updater (dropdown far right Utilities tab)
Upon reboot, ask DaveP to license system.
System can be shipped. If Template / Configuration work is available, best to update as much as possible before shipping.