• Try Us Out - See our Demo Tabs Above

    Sports Bars

    Experience our Sports Bar TV, Audio and Lighting Control System with our awesome demo! We provide multiple TV control systems that will easily integrate your Audio/Video and environmental components into one easy to use package. Let multiple hand-held remotes be a thing of the past and experience hassle free one-touch control. With the versatility of myServer 6, you may be able to retrofit existing equipment into the control system which makes it economical to get the most value out of your technology investment.

    Residential

    With a whole new exciting look and feel our transparent "Moonlight" user interface allows clarity and ease in maneuvering your lighting floor plan, climate control, security cameras, and security keypad as well as entertainment options. Control all aspects of your home with simplicity and confidence.

    Digital Signage

    Allonis makes it easy to control and launch your media content. We have created software that ties in seamlessly to your bar or restaurant control system. Upload new images and videos, discard old ones, decide what to play or post and where with just a few selections.

  • Sports Bar & Restaurant Demo

    Select a source on the left and then select the TVs you would like to change on the right.

    Along the bottom are options for a DirecTV remote, TV Guide, Audio, Favorites & AppleTV. In addition you can touch the video camera on the left hand source options to get a live preview of what's playing on that source. Be sure to click around and try everything.

    Read More

     

    Customer Listening Experience

    Pan from left to right and up and down to see all the TVs.

    Customers can select the TV closest to them to tune in to the audio.

    Read More

     

    No Floorplan Option.

    If you are not interested in a navigable floor plan we can provide a generic interface instead.

    The same features are supported.

    Read More

  • Residential Demo

    Below is our residential simulation.

    Be sure to click around and try everything. Read more about the UI below.

    Read More

  • Digital Signage

    In the large window select a player on the left. Then select an option layout on the right. Select available assets from the list provided. You can add a ticker of either a message or weather by checking the boxes. When you are finished making selections click “send to player”. Your choice will appear on the corresponding player above. To pause a video click the player once.

    Read More

  • SmartRemote Demo

    Below is our SmartRemote simulation.

    Be sure to click around and try everything. Read more about the UI below.

    Read More

Our Products

See the latest myServer 6 products, available for individual purchase or part of a custom Allonis system built especially for your project.
Software
Hardware
Sports Bars
Services

Anthem Driver

Details

The Anthem device driver supports the following Anthem Devices;

MRX-1140,  MRX-1120, MRX-740, MRX-720, MRX-540, MRX-520, AVM-60, AVM-70 and AVM-90.

The driver will support all the basic commands to control the amp during normal use. It does not attempt to reproduce every protocol command especially the commands for setting up the device. These commands are typically only used during the initial setup of the amp and the remote supplied with the amp is best used for that.

Install the driver from the Software updater and after the server restarts navigate to the drivers page and open the Anthem page.

Anthem1

Make sure your Anthem amp is powered on and on the network. Click on the Discover button to start the discovery process.

After a few seconds your amp should be discovered.

Anthem2

Please confirm that the correct model Anthem was discovered. If not please let tech support know.

You can also manually add the amp via the driver's command builder AddAmp command.

Anthem3

In either case make sure the driver can successfully communicate with your amp. Check the servers live event log for any issues.

The amp will be added into the Unknown room. Please make sure that you move it into the correct room before further testing.

The device type should be "AVR".

 

Amp Testing:

You can test basic  amp functionality directly in the driver. From the command builder execute the select device command. Use the exposed controls to the left of the command builder to test communication with the amp.

Anthem4

If you look in Configuration / Sources & Apps you should see that a new source has been added.

Anthem5

From Configuration / Sources & Apps by Room you should see that it has been placed in the specified room.

Anthem6

 

SmartRemote:

Navigating to the home page on the SmartRemote you should see a source entry for the amp under the AVR icon. Pressing the icon will bring you to the generic AVR page. Here you will have basic control of the amp. You are free to modify this page to suite your needs. The hard buttons will control volume, mute and power.

Anthem7

 Anthem8

Amplifier Setup:

At the bottom of the Anthem driver page you will see a button labeled View Anthem Settings. Clicking this button will take you to the amp's configuration web page.

Anthem9

Please report any issues or driver enhancements on the our Forums.